End Caps for SB Series

Click on thumbnail(s) to view larger image

Product Photo
Product Photo
Product Photo

Product Category: CI/EIFS/Hardcoat

Application

End caps for the SB series have a 2" (51 mm) back flange, provide protection against moisture intrusion by directing water out front of window/door assembly. Low profile design blocks pests/discouraging nesting.

Specifications

End Caps shall be Plastic Components, Inc. #_________. All exterior accessories shall meet ASTM standards D1784, C1063 and D4216, shall be third party tested and Canadian Code Compliant. They shall be used where specified by the design authority and installed per industry standards.

Information Sheets

Product Chart

Add to Submittal Product # Description Dimensions Packaging
WDEC2-1

2" (51 mm) back flange

1" (25 mm) bottom flange

25 per box
WDEC2-2

2" (51 mm) back flange

2" (51 mm) bottom flange

25 per box
WDEC2-15

2" (51 mm) back flange

1-1/2" (38 mm) bottom flange

25 per box

Product Notes

The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.

It is recommended that PVC products be used for all exterior exposures.