2-Piece Soffit Vent w/90º Leg

Click on thumbnail(s) to view larger image

Product Photo

Product Category: CI/EIFS/Hardcoat, Vents


Designed for use where a horizontal soffit and a vertical plane intersect. Attach the F-clip to either the vertical fascia board or the intersecting vertical wall with the wide flange of the F-clip extending downward. Then insert the perforated vent into the F-clip.Vent holes 1/8" (3 mm) diameter.


Soffit Vent shall be Plastic Components Inc. #___________. All exterior accessories shall meet ASTM standards D1784, C1063 and D4216, shall be third party tested and Canadian Code Compliant. They shall be used where specified by the design authority and installed per industry standards.

Information Sheets


Product Chart

Add to Submittal Product # Description Dimensions Packaging
F548-1 WF551

2-5/8" (67 mm) wide vented area

1" (25 mm) board thickness

10 per box
F548-15 WF551

2-5/8" (67 mm) wide vented area

1-1/2" (38 mm) board thickness

8 per box

Product Notes

10' (3 m) lengths - Connector clips included
All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.