Respiradero de Sofito de 2 piezas con Pata de 90º

Haga clic en las miniaturas para ver una imagen más grande.

Product Photo

Categoria de Producto: Respiraderos, Sistemas Exteriores de Aislamiento y Acabados (EIFS)


Designed for use where a horizontal soffit and a vertical plane intersect. Attach the F-clip to either the vertical fascia board or the intersecting vertical wall with the wide flange of the F-clip extending downward. Then insert the perforated vent into the F-clip.Vent holes 1/8" (3 mm) diameter.


Soffit Vent shall be Plastic Components Inc. #___________. All exterior accessories shall conform to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the design authority and installed per industry standards.

Hojas Informativas

Dibujos Arquitectónicos

Tabla de Productos

Añadir a Submittal No. de Producto Descripción Dimensiones embalaje
F548-1 WF551

2-5/8" (67 mm) wide vented area

1" (25 mm) board thickness

10 por Caja
F548-15 WF551

2-5/8" (67 mm) wide vented area

1-1/2" (38 mm) board thickness

8 por Caja

Notas sobre el producto

10' (3 m) lengths - Connector clips included
All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.