A surface mounted vent suitable for all applications except stucco. Vent installs easily on all sheathing products with either spray adhesives or screws. Vent holes 1/8" (3 mm) diameter. For foam applications, a non-solvent base spray adhesive or a 3/4" (19 mm) pin-tac is recommended for attachment. All flanges must be base coated and covered with mesh per system manufacturer.
Surface Mounted Vent shall be Plastic Components Inc. #________. All exterior accessories shall conform to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the design authority and installed per industry standards
|Add to Submittal||Product #||Description||Dimensions||Packaging|
10' (3 m) lengths - Connector clips included
1/8" (3 mm) ground. For all applications except stucco
The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.
All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).
It is recommended that PVC products be used for all exterior exposures.