Continuous Soffit Vent

Haga clic en las miniaturas para ver una imagen más grande.

Product Photo
Product Photo

Categoria de Producto: Respiraderos


Designed for use with 1" and 1-1/2" (25 and 38 mm) foam board. Vent holes 1/8" (3 mm) diameter. Vented area is 2-5/8" (67 mm) wide. Extra wide mounting flanges make attachment to sheathing easier. Wide flange has 1/8" (3 mm) stops with striations to provide positive bond of the base coat and mesh assuring proper finish thickness.


Continuous Soffit Vent shall be Plastic Components Inc. #________. All exterior accessories shall conform to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the design authority and installed per industry standards.

Hojas Informativas

Dibujos Arquitectónicos

Tabla de Productos

Añadir a Submittal No. de Producto Descripción Dimensiones embalaje

14 sq. inches free linear air flow (9,033 sq. mm).

1" (25 mm) ground

10 por Caja

14 sq. inches free linear air flow (9,033 sq. mm).

1-1/2" (38 mm) ground

8 por Caja

Notas sobre el producto

10' (3 m) lengths - Connector clips included

All butt joints, intersections and ends shall be caulked at the time of installation using our elastomeric sealant PC-TS00215.

It is recommended that PVC products be used for all exterior exposures.