Product Search

Factory Assembled Intersections for Floor Line Control Bead reduce labor in the field and provide a better quality finish

Inside Corner Control Joint relieves stress and cracking caused by expansion and contraction in the inside angles of walls and ceilings.

Used as an expansion joint while providing a reveal. Designed to expand and contract when severe movement is anticipated. When using in the vertical application, the lath should be split before installing the slip joint. When used in a horizontal plane, the same procedure should be used before placing the female side on top.

Used as an expansion joint while providing a reveal. Designed to expand and contract when severe movement is anticipated. When using in the vertical application, the lath should be split before installing the slip joint. When used in a horizontal plane, the same procedure should be used before placing the female side on top.

208: Used where smooth rounded corners are specified. Will not dent or rust. Excellent paint and drywall mud adhesion. Flange is 5/8" (16 mm) wide. 208H: Same features as regular 208, except mudding flange is a full 1" (25 mm) wide. Shallow shoulder eliminates heavy build-up of topping. 208HI: Dual purpose Bullnose can be used for either interior or exterior applications. Wider flange and "raised" shoulder will accept thicker finishes. Flange is a full 1" (25 mm) wide.

208: Used where smooth rounded corners are specified. Will not dent or rust. Excellent paint and drywall mud adhesion. Flange is 5/8" (16 mm) wide. 208H: Same features as regular 208, except mudding flange is a full 1" (25 mm) wide. Shallow shoulder eliminates heavy build-up of topping. 208HI: Dual purpose Bullnose can be used for either interior or exterior applications. Wider flange and "raised" shoulder will accept thicker finishes. Flange is a full 1" (25 mm) wide.

To be used in conditions where two 45º walls intersect forming a 120 to 135º angle.

To be used in conditions where two 45º walls intersect forming a 120 to 135º angle.

For use when an inside radius corner is specified. Serves as complementary trim when an outside bullnose corner bead is being used.

For use when an inside radius corner is specified. Serves as complementary trim when an outside bullnose corner bead is being used.