Product Search
![](https://plasticomponents.com/wp-content/uploads/2015/09/M-Control-Joint-11-wpcf_100x100.jpg)
"M" control joints, 1/2" (13 mm) with removable tape. Larger perforated flanges with two rows of holes.
5/8" (16 mm) ground
This popular "M" design not only provides control of substrate movement but also gives the appearance of an narrow reveal. Removable tape keeps the "V" clean during installation.
![](https://plasticomponents.com/wp-content/uploads/2015/09/M-Control-Joint-11-wpcf_100x100.jpg)
"M" control joints, 1/2" (13 mm) with removable tape. Larger perforated flanges with two rows of holes.
3/4" (19 mm) ground
This popular "M" design not only provides control of substrate movement but also gives the appearance of an narrow reveal. Removable tape keeps the "V" clean during installation.
![](https://plasticomponents.com/wp-content/uploads/2015/09/M-Control-Joint-11-wpcf_100x100.jpg)
"M" control joints, 1/2" (13 mm) with removable tape. Larger perforated flanges with two rows of holes.
7/8" (22 mm) ground
This popular "M" design not only provides control of substrate movement but also gives the appearance of an narrow reveal. Removable tape keeps the "V" clean during installation.
![](https://plasticomponents.com/wp-content/uploads/2015/08/Surface-Mounted-J-Bead-wpcf_100x100.jpg)
1-1/2" (38 mm) wide perforated and grooved flange, for exterior applications.
3/8" (10 mm) ground
A surface mounted "J" bead design that protects the bottom edge of the sheathing board and eliminates the need for costly back wrapping. Has a wide return flange with striations and perforations for positive bond of base coat to casing bead and surface of sheathing material. Has built-in 1/8" (3 mm) stop to ensure proper thickness of base and finish.
![](https://plasticomponents.com/wp-content/uploads/2015/08/Surface-Mounted-J-Bead-wpcf_100x100.jpg)
1-1/2" (38 mm) wide perforated and grooved flange, for exterior applications.
1/2" (13 mm) ground
A surface mounted "J" bead design that protects the bottom edge of the sheathing board and eliminates the need for costly back wrapping. Has a wide return flange with striations and perforations for positive bond of base coat to casing bead and surface of sheathing material. Has built-in 1/8" (3 mm) stop to ensure proper thickness of base and finish.
![](https://plasticomponents.com/wp-content/uploads/2015/08/Surface-Mounted-J-Bead-wpcf_100x100.jpg)
1-1/2" (38 mm) wide perforated and grooved flange, for exterior applications.
5/8" (16 mm) ground
A surface mounted "J" bead design that protects the bottom edge of the sheathing board and eliminates the need for costly back wrapping. Has a wide return flange with striations and perforations for positive bond of base coat to casing bead and surface of sheathing material. Has built-in 1/8" (3 mm) stop to ensure proper thickness of base and finish.
![](https://plasticomponents.com/wp-content/uploads/2015/08/Shadow-Mold-Z-Mold-wpcf_100x100.jpg)
Can be used with 1/2" (13 mm) and 5/8" (16 mm) sheathing.
Dim A: 1/2" (13 mm)
Dim B: 1/2" (13 mm) or more
Shadow Mold/"Z" Mold provides a reveal or relief detail around windows, doors, and wall to ceiling junctions. Can be used in either vertical or horizontal position.
![](https://plasticomponents.com/wp-content/uploads/2015/05/22027-16-wpcf_100x100.jpg)
1/16" (2 mm) finish thickness
Designed to be installed between two separated sheets of sheathing board. It has a full 1-1/2" (38 mm) wide flange that rests on top of the sheathing board. The flanges have striations and perforations to ensure positive keying and bonding of the ground coat.
![](https://plasticomponents.com/wp-content/uploads/2015/08/EIFS-V-Control-Joint-wpcf_100x100.jpg)
1/16" (2 mm) finish thickness
To relieve stress caused by expansion and contraction within the system. This PVC deep groove "V" control joint is the most economical answer. Control joint should be placed at 144 sq. ft. (13.5 sq. meters) intervals. Removable tape keeps the "V" clean during installation. Excellent paint adhesion.
![](https://plasticomponents.com/wp-content/uploads/2015/08/EIFS-V-Control-Joint-wpcf_100x100.jpg)
1/4" (6 mm) finish thickness
To relieve stress caused by expansion and contraction within the system. This PVC deep groove "V" control joint is the most economical answer. Control joint should be placed at 144 sq. ft. (13.5 sq. meters) intervals. Removable tape keeps the "V" clean during installation. Excellent paint adhesion.