Product Search
![](https://plasticomponents.com/wp-content/uploads/2015/05/22027-16-wpcf_100x100.jpg)
1/4" (6 mm) finish thickness
Designed to be installed between two separated sheets of sheathing board. It has a full 1-1/2" (38 mm) wide flange that rests on top of the sheathing board. The flanges have striations and perforations to ensure positive keying and bonding of the ground coat.
![](https://plasticomponents.com/wp-content/uploads/2015/08/EIFS-V-Control-Joint-wpcf_100x100.jpg)
Profundidad de 1/4" (6 mm)
To relieve stress caused by expansion and contraction within the system. This PVC deep groove "V" control joint is the most economical answer. Control joint should be placed at 144 sq. ft. (13.5 sq. meters) intervals. Removable tape keeps the "V" clean during installation. Excellent paint adhesion.
![](https://plasticomponents.com/wp-content/uploads/2015/05/22027-16-wpcf_100x100.jpg)
3/8" (10 mm) finish thickness
Designed to be installed between two separated sheets of sheathing board. It has a full 1-1/2" (38 mm) wide flange that rests on top of the sheathing board. The flanges have striations and perforations to ensure positive keying and bonding of the ground coat.
![](https://plasticomponents.com/wp-content/uploads/2015/08/EIFS-V-Control-Joint-wpcf_100x100.jpg)
3/8" (10 mm) finish thickness
To relieve stress caused by expansion and contraction within the system. This PVC deep groove "V" control joint is the most economical answer. Control joint should be placed at 144 sq. ft. (13.5 sq. meters) intervals. Removable tape keeps the "V" clean during installation. Excellent paint adhesion.
![](https://plasticomponents.com/wp-content/uploads/2015/08/Shadow-Mold-Z-Mold-wpcf_100x100.jpg)
Can be used with 1/2" (13 mm) and 5/8" (16 mm) sheathing.
Dim A: 3/4" (19 mm)
Dim B: 1/2" (13 mm) or more
Shadow Mold/"Z" Mold provides a reveal or relief detail around windows, doors, and wall to ceiling junctions. Can be used in either vertical or horizontal position.
![](https://plasticomponents.com/wp-content/uploads/2015/08/Shadow-Mold-Z-Mold-wpcf_100x100.jpg)
Can be used with 1/2" (13 mm) and 5/8" (16 mm) sheathing.
Dim A: 1" (25 mm)
Dim B: 1/2" (13 mm) or more
Shadow Mold/"Z" Mold provides a reveal or relief detail around windows, doors, and wall to ceiling junctions. Can be used in either vertical or horizontal position.
![](https://plasticomponents.com/wp-content/uploads/2015/08/corner-bead-wireframe-wpcf_100x100.jpg)
1-5/8" x 1-5/8" (41 mm x 41 mm)
de alas ranuradas anchas con
orificios grandes.
Diseñado con reborde ancho para asegurar esquinas rectas y sin óxido, mientras que proporciona esquinas resistentes a los impactos. El reborde tiene estrías y perforaciones para asegurar un enlace positivo de la base con el reborde y la superficie del material de revestimiento.
![](https://plasticomponents.com/wp-content/uploads/2015/08/2209-Page-D-2-right.jpg)
1-5/8" x 1-5/8" (41 mm x 41 mm) with large holes in wide grooved flanges
Designed with wide flanges to ensure straight and rust-free corners while providing high impact resistant corners. Flange has striations and perforations to ensure a positive bond of the base to the flange and the surface of the sheathing material.
![](https://plasticomponents.com/wp-content/uploads/2015/08/2209-Page-D-2-right.jpg)
1-5/8" x 1-5/8" (41 mm x 41 mm) with large holes in wide grooved flanges
Designed with wide flanges to ensure straight and rust-free corners while providing high impact resistant corners. Flange has striations and perforations to ensure a positive bond of the base to the flange and the surface of the sheathing material.
![](https://plasticomponents.com/wp-content/uploads/2015/08/Arch-Corner-Bead-wpcf_100x100.jpg)
Corner Bead, 1-5/8" (41 mm) pre-slotted flange.
Designed with wider, striated flanges for better adhesion. For use where an arch or free flow design is specified. One flange is pre-slotted for perfect arches.