Product Search
![](https://plasticomponents.com/wp-content/uploads/2020/06/19-Drip-Egde-Inside-Corner-e1592408137144-wpcf_100x100.jpg)
1-1/2" (38 mm) x 1-1/2" (38 mm) Inside Outside corner
Corner Bead was designed to provide consistent angles and even, impact-resistant corners.
Fiber cement board trims provide a rust-free finish, superior moisture management and protection and can be used with 5/16" to 1/2" board. These products provide a cleaner job and a better finish.
![](https://plasticomponents.com/wp-content/uploads/2015/08/DEFS_reveal_intersection_1-wpcf_100x100.jpg)
1/2" (13 mm) reveal
1/2" (13 mm) ground
These factory thermal welded, surface mounted intersections eliminate the costly and time consuming need to field cut intersections.
![](https://plasticomponents.com/wp-content/uploads/2015/08/reveal_intersection_1-wpcf_100x100.jpg)
1/2" (13 mm) width
1/2" (13 mm) depth
These factory thermal welded, surface mounted intersections eliminate the costly and time consuming need to field cut intersections.
![](https://plasticomponents.com/wp-content/uploads/2015/08/exterior_aesthetic-wpcf_100x100.jpg)
Dim A: 1/2" (13 mm)
Designed for 1/2" (13 mm) exterior foam applications, has two flanges.
Made for exterior use in EIFS systems. The EPS board should be routed and surface mounted reveal then inserted into channel. Wide perforated surface mounted flanges assure positive bonding of base coat to EPS and 1/8" (3 mm) stops assure proper base and finish thickness.
![](https://plasticomponents.com/wp-content/uploads/2015/08/aesthetic_reveal-wpcf_100x100.jpg)
Designed for 1/2" (13 mm) or 5/8" (16 mm) exterior sheathing applications, has two flanges.
Dim A: 1/2" (13 mm)
Designed for DEFS systems. Perforated flanges are placed on top of separated sheets of sheathing board with "U" channel in separated channel. Has built-in stops to ensure proper thickness of base and finish.
![](https://plasticomponents.com/wp-content/uploads/2015/07/2225P-left-copy-wpcf_100x100.jpg)
Creates a 1/2" (13 mm) drip edge when installed in concrete forming.
![](https://plasticomponents.com/wp-content/uploads/2015/08/exterior_aesthetic-wpcf_100x100.jpg)
Dim A: 1" (25 mm)
Designed for 1/2" (13 mm) exterior foam applications, has two flanges.
Made for exterior use in EIFS systems. The EPS board should be routed and surface mounted reveal then inserted into channel. Wide perforated surface mounted flanges assure positive bonding of base coat to EPS and 1/8" (3 mm) stops assure proper base and finish thickness.
![](https://plasticomponents.com/wp-content/uploads/2015/08/aesthetic_reveal-wpcf_100x100.jpg)
Designed for 1/2" (13 mm) or 5/8" (16 mm) exterior sheathing applications, has two flanges.
Dim A: 1" (25 mm)
Designed for DEFS systems. Perforated flanges are placed on top of separated sheets of sheathing board with "U" channel in separated channel. Has built-in stops to ensure proper thickness of base and finish.
![](https://plasticomponents.com/wp-content/uploads/2015/08/DEFS_reveal_intersection_1-wpcf_100x100.jpg)
1" (25 mm) reveal
1/2" (13 mm) ground
These factory thermal welded, surface mounted intersections eliminate the costly and time consuming need to field cut intersections.
![](https://plasticomponents.com/wp-content/uploads/2015/08/reveal_intersection_1-wpcf_100x100.jpg)
Ancho: 1" (25 mm)
Profundidad de
1/2" (13 mm)
These factory thermal welded, surface mounted intersections eliminate the costly and time consuming need to field cut intersections.