Product Search
5" (127 mm) tan GutterGuard
GutterGuard Pro is a one-piece unit, made of heavy duty UV resistant PVC. Its designed to easily slip under the shingle and snap into place without any fasteners allowing for reduced installation time and less parts to inventory. The drip edge removes water from the gutter eliminating unsightly streaks. Ends are trimmed – precut for easy overlapping of each 10' section.
Visit GutterGuard Pro Website
Dim A: 1" (25 mm)
i DRIP TRAC™ is a one-piece positive flow combination Starter TRAC® with a built-in flashing drip edge. Weep holes are located at the front of the TRAC to carry moisture away from the building. Uses include above windows and doors; or as a Starter TRAC. The return face flange is 1" (25 mm) wide, with striations which provide a strong physical bond for the base coat to the return flange. A double row of holes allows for positive bond of the base to the substrate. Weep holes are set at 4" (102 mm) on center.
Dim A: 1-1/4" (31 mm)
i DRIP TRAC™ is a one-piece positive flow combination Starter TRAC® with a built-in flashing drip edge. Weep holes are located at the front of the TRAC to carry moisture away from the building. Uses include above windows and doors; or as a Starter TRAC. The return face flange is 1" (25 mm) wide, with striations which provide a strong physical bond for the base coat to the return flange. A double row of holes allows for positive bond of the base to the substrate. Weep holes are set at 4" (102 mm) on center.
Dim A: 1-1/2" (34 mm)
i DRIP TRAC™ is a one-piece positive flow combination Starter TRAC® with a built-in flashing drip edge. Weep holes are located at the front of the TRAC to carry moisture away from the building. Uses include above windows and doors; or as a Starter TRAC. The return face flange is 1" (25 mm) wide, with striations which provide a strong physical bond for the base coat to the return flange. A double row of holes allows for positive bond of the base to the substrate. Weep holes are set at 4" (102 mm) on center.
Dim A: 1-3/4" (38 mm)
i DRIP TRAC™ is a one-piece positive flow combination Starter TRAC® with a built-in flashing drip edge. Weep holes are located at the front of the TRAC to carry moisture away from the building. Uses include above windows and doors; or as a Starter TRAC. The return face flange is 1" (25 mm) wide, with striations which provide a strong physical bond for the base coat to the return flange. A double row of holes allows for positive bond of the base to the substrate. Weep holes are set at 4" (102 mm) on center.
Dim A: 2" (51 mm)
i DRIP TRAC™ is a one-piece positive flow combination Starter TRAC® with a built-in flashing drip edge. Weep holes are located at the front of the TRAC to carry moisture away from the building. Uses include above windows and doors; or as a Starter TRAC. The return face flange is 1" (25 mm) wide, with striations which provide a strong physical bond for the base coat to the return flange. A double row of holes allows for positive bond of the base to the substrate. Weep holes are set at 4" (102 mm) on center.
Dim A: 2-1/4" (57 mm)
i DRIP TRAC™ is a one-piece positive flow combination Starter TRAC® with a built-in flashing drip edge. Weep holes are located at the front of the TRAC to carry moisture away from the building. Uses include above windows and doors; or as a Starter TRAC. The return face flange is 1" (25 mm) wide, with striations which provide a strong physical bond for the base coat to the return flange. A double row of holes allows for positive bond of the base to the substrate. Weep holes are set at 4" (102 mm) on center.
Dim A: 2-1/2" (64 mm)
i DRIP TRAC™ is a one-piece positive flow combination Starter TRAC® with a built-in flashing drip edge. Weep holes are located at the front of the TRAC to carry moisture away from the building. Uses include above windows and doors; or as a Starter TRAC. The return face flange is 1" (25 mm) wide, with striations which provide a strong physical bond for the base coat to the return flange. A double row of holes allows for positive bond of the base to the substrate. Weep holes are set at 4" (102 mm) on center.
Dim A: 2-3/4" (70 mm)
i DRIP TRAC™ is a one-piece positive flow combination Starter TRAC® with a built-in flashing drip edge. Weep holes are located at the front of the TRAC to carry moisture away from the building. Uses include above windows and doors; or as a Starter TRAC. The return face flange is 1" (25 mm) wide, with striations which provide a strong physical bond for the base coat to the return flange. A double row of holes allows for positive bond of the base to the substrate. Weep holes are set at 4" (102 mm) on center.
Dim A: 3" (76 mm)
i DRIP TRAC™ is a one-piece positive flow combination Starter TRAC® with a built-in flashing drip edge. Weep holes are located at the front of the TRAC to carry moisture away from the building. Uses include above windows and doors; or as a Starter TRAC. The return face flange is 1" (25 mm) wide, with striations which provide a strong physical bond for the base coat to the return flange. A double row of holes allows for positive bond of the base to the substrate. Weep holes are set at 4" (102 mm) on center.