CB STARTER TRAC™ with Drip Edge
Click on thumbnail(s) to view larger image
Product Category: CI/EIFS/Hardcoat
Application
Acts as a casing bead for the EPS board to sit in. Extended return face flange serves as a drip edge. Provides straight lines. Flange perforations allow ground coat to bond with the EPS board.
Specifications
Starter TRAC® with Drip Edge shall be Plastic Components Inc. #________. All exterior accessories shall meet ASTM standards D1784, C1063 and D4216, shall be third party tested and Canadian Code Compliant. They shall be used where specified by the design authority and installed per industry standards.
Information Sheets
Drawings
Product Chart
| Add to Submittal | Product # | Description | Dimensions | Packaging |
|---|---|---|---|---|
| CB-50-16L | Dim A: 1/2" (13 mm) |
60 per box | ||
| CB-58-16L | Dim A: 5/8" (16 mm) |
60 per box | ||
| CB-75-16L | Dim A: 3/4" (19 mm) |
40 per box | ||
| CB-1-16L | Dim A: 1" (25 mm) |
40 per box | ||
| CB-15-16L | Dim A: 1-1/2" (38 mm) |
35 per box | ||
| CB-2-16L | Dim A: 2" (51 mm) |
30 per box | ||
| CB-125-16L | Dim A: 1-1/4" (32 mm) |
35 per box |
Product Notes
10' (3 m) lengths - Add suffix "WP" to order with weep holes. Example: CBWP-15-16L • *Dimension A - please measure inside to inside
The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.
It is recommended that PVC products be used for all exterior exposures.