2-Piece Hard Coat EIFS Casing Bead/STARTER TRAC™
Click on thumbnail(s) to view larger image
Product Category: CI/EIFS/Hardcoat
Application
Two-piece starter strip locks into the finish. Protects EPS from damage at critical aread, gives positive protection. Eliminates back wrapping and finish of hard-to-reach areas. Can also be used as a casing bead in high impact areas.
Specifications
Starter Strip/Casing Bead shall be Plastic Components, Inc. #______. All exterior accessories shall meet ASTM standards D1784, C1063 and D4216, shall be third party tested and Canadian Code Compliant. They shall be used where specified by the design authority and installed per industry standards.
Information Sheets
Drawings
Product Chart
| Add to Submittal | Product # | Description | Dimensions | Packaging |
|---|---|---|---|---|
| SC-2-38 | Dim A: 2" (51 mm) |
Dim B: 3/8" (10 mm) |
30 per box | |
| SC-2-25 | Dim A: 2" (51 mm) |
Dim B: 1/4" (6 mm) |
30 per box | |
| SC-15-38 | Dim A: 1-1/2" (38 mm) |
Dim B: 3/8" (10 mm) |
40 per box | |
| SC-15-25 | Dim A: 1-1/2" (38 mm) |
Dim B: 1/4" (6 mm) |
40 per box | |
| SC-1-38 | Dim A: 1" (25 mm) |
Dim B: 3/8" (10 mm) |
50 per box | |
| SC-1-25 | Dim A: 1" (25 mm) |
Dim B: 1/4" (6 mm) |
50 per box | |
| SC-1-15 | Dim A: 1" (25 mm) |
Dim B: 1/8" (3 mm) |
50 per box |
Product Notes
10' (3 m) lengths - Add suffix "WP" to order with weep holes. Example SCWP-1-25.
The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.
It is recommended that PVC products be used for all exterior exposures.