i DRIP TRAC®
Click on thumbnail(s) to view larger image
Product Category: Direct Applied
Application
i DRIP TRAC® is a one-piece positive flow combination STARTER TRAC® with built-in flashing drip edge. Weep holes, set at 4" (102 mm) on center, are located at the front of the TRAC to carry moisture away from the building. Uses: above windows, doors; as a Starter TRAC. Return face flange is 1" (25 mm) wide, with striations which provide a strong physical bond for the base coat to the return flange. A double row of holes allows for positive bond of the base to the substrate.
Specifications
i DRIP TRAC shall be Plastic Components Inc. #________. All exterior accessories shall conform to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the design authority and installed per industry standards.
Information Sheets
Drawings
Product Chart
| Add to Submittal | Product # | Description | Dimensions | Packaging |
|---|---|---|---|---|
| iDT-58 | One-piece combination weeped STARTER TRAC® with head flashing |
Dim A: 5/8" (16 mm) |
35 per box | |
| iDT-50 | One-piece combination weeped STARTER TRAC® with head flashing |
Dim A: 1/2" (13 mm) |
35 per box |
Product Notes
10' (3 m) lengths • Patented • Please measure Dimension A inside to inside.
All butt joints, intersections and ends shall be caulked at the time of installation using our elastomeric sealant PC-TS00215.
It is recommended that PVC products be used for all exterior exposures.