Surface Mounted Vent 3″, 4″ and 6″ vents

Click on thumbnail(s) to view larger image

Product Photo
Product Photo
Product Photo

Product Category: Direct Applied, Lumber, Building Materials, Vents

Application

A surface mounted vent suitable for all applications except three coat stucco systems. Vent installs easily on all sheathing products depending on the substrate with either spray adhesives, staples and/or screws according to substrate manufacturers' technical details. Vent holes 1/8" (3 mm) diameter. All flanges must be base coated and covered with mesh per system manufacturer.

Specifications

Surface Mounted Vent shall be Plastic Components Inc. #________. All exterior accessories shall meet ASTM standards D1784, C1063 and D4216, shall be third party tested and Canadian Code Compliant. They shall be used where specified by the design authority and installed per industry standards.

Information Sheets

Product Chart

Add to Submittal Product # Description Dimensions Packaging
SMV6

6" (152 mm) wide vent area. 18 sq. in. (11,614 sq. mm)
free air flow per linear ft.

1/8" (3 mm) ground

30 per box
SMV4

4" (102 mm) wide vent area. 16 sq. in. (10,323 sq. mm)
free air flow per linear ft.

1/8" (3 mm) ground

35 per box
SMV3

3" (76 mm) wide vent area. 15 sq.in. (9,678 sq. mm)
free air flow per linear ft.

1/8" (3 mm) ground

35 per box

Product Notes

10' (3 m) lengths • Connector clips included • For all applications except three coat stucco systems.