Eliminates costly rasping and double wrapping of corners. The nose allows for straight corners and proper depth of finish. High impact resistant.
Provides a rustproof, high impact resistant non-kinking corner. The design of the hole pattern in the flanges allows the stucco to flow through forming a solid layer giving the corner extra strength. Larger holes in the nailing flange make it easier to install when using stub nails.
Use at areas where stucco terminates at foundations, windows, doors or any other termination point. Will not rust or dent.
Plastic Components' Ultra Casing Bead features a built-in seal for improved water management in stucco and stone veneer applications. Creates consistent spacing around window/door frames, helps keep moisture from entering around doors, windows and other dissimilar claddings. Its easy to handle, UV rated and available in four colors, white, tan, gray and dark brown. And its red color makes inspections easier.
To be used in any area where a banding/pop out or "quoin" detail is desired. "T" bar design adds strength and will reduce "waving" with the extra thickness of the stucco.
Should be used in any application where a surface area is more than 144 square feet. The wide flange allows for more "keying" of the stucco. The "eyebrows" allow for the stucco to key to the "V". Vertical joints should be attached to a stud where necessary.
This popular "M" design not only provides control of substrate movement but also gives the appearance of an narrow reveal. Removable tape keeps the "V" clean during installation.
For use as a horizontal control joint and a moisture control device where two dissimilar materials, such as wood and concrete, meet. (e.g. First floor concrete block construction and wood frame second floor). It allows moisture to migrate away from the wall. The unique drip edge prevents migrating moisture from entering the v-groove of the control joint.
To be installed at plate line or stem wall, to provide a stucco stop. Design allows moisture to migrate down and shed away from wall.
One-piece, non-metallic dryer vent mounting block kit provides a secure, attractive and time-saving way to install dryer vents on new siding.