Product name search
These factory thermal welded, surface mounted intersections eliminate the costly and time consuming need to field cut intersections.
Designed for DEFS systems. Perforated flanges are placed on top of separated sheets of sheathing board with "U" channel in separated channel. Has built-in stops to ensure proper thickness of base and finish.
Designed specifically for sheathing products. Has a built-in stop (1/8"-3 mm) to assure proper base thickness as well as maintaining a clean finish edge. The stop flange is serrated for positive material bond. Will not rust, excellent paint adhesion. Connector clips are provided to eliminate sagging at butt joints. Vent holes 1/8" (3 mm) diameter.
Water management product designed to provide positive slope at window sill. Window frame sits on sloped sill wedge, and directs moisture towards the face of the moisture barrier where it drains out the bottom of the system.
A TRAC for DEFS systems with a double row of drainage holes at the rear of the TRAC. The 1-1/8" (29 mm) return face flange. 4-hole pattern for superior bond of base coat to board. Its 2" (51 mm) wide nailing flange with nail attachment holes set at 4" (102 mm) o.c. offer easier attachment.
Designed as a soffit drip screed. Provides a 1/2" (13 mm) reveal detail. Prevents water from running down the fascia and back into the soffit area. Surface areas have striations that provide positive bonding of base coat to profile detail. Has 1/8" (3 mm) stops to ensure proper thickness of base and finish.
To be installed at plate line or stem wall, to provide a stucco stop. Design allows moisture to migrate down and shed away from wall.
Window or door drip edge has a sloped front edge allowing moisture to shed down surface and not enter into the framing.
End caps for the SB-EMT series have a 3" (76 mm) back flange, provide protection against moisture intrusion by directing water out front of window/door assembly. Low profile design blocks pests/discouraging nesting.
End caps for the SB series have a 2" (51 mm) back flange, provide protection against moisture intrusion by directing water out front of window/door assembly. Low profile design blocks pests/discouraging nesting.