Product name search
Reinforced casing bead, 1-5/8" (41 mm) perforated flange, 3/16" (5 mm) lip.
Two-piece starter strip locks into the finish. Protects EPS from damage at critical aread, gives positive protection. Eliminates back wrapping and finish of hard-to-reach areas. Can also be used as a casing bead in high impact areas.
Can be used as a STARTER TRAC® at the base of a wall or an EIFS casing bead around window and door openings. Face return flange is 1" (25 mm) with striations which provide a strong physical bond for the base coat and perforations for bonding the base to the substrate. Ideal for use where finished edge is exposed. 3" (76 mm) wide nailing flange also has striations for extra bonding.
SB-EMT Starter TRAC is the PVC trim to choose for extreme moisture conditions. For use at the base of a wall, this new Starter TRAC has a 3" (76 mm) back flange and sloped front edge to move moisture out and away from the wall assembly.
Acts as a casing bead for the EPS board to sit in. Extended return face flange serves as a drip edge. Provides straight lines. Flange perforations allow ground coat to bond with the EPS board.
Acts as a casing bead for the EPS board. Can be used around windows and doors. Provides a clean straight line. PVC surface allows caulking to adhere. Flange perforations allow ground coat to bond with the EPS board. Excellent paint adhesion.
STARTER TRAC® with drip edge. Face return flange 1-1/4" (32 mm) with striations which provide a strong physical bond for the base coat and perforations for bonding of the base to the substrate. Extra wide 3" (76 mm) nailing flange has striations on inside face to aid bonding of foan board to nailing flange. Base shelf has weep holes 3" (76 mm) o.c. to allow migration of water from system.
Can be used as a STARTER TRAC® or Casing Bead. Face return flange is 1" (25 mm) with striations which provide a strong physical bond for the base coat and perforations for bonding the base to the substrate. Available with weep holes. Ideal for use where finished edge is exposed. 3" (76 mm) wide nailing flange also has striations for extra bonding.
i DRIP TRAC™ is a one-piece positive flow combination Starter TRAC® with a built-in flashing drip edge. Weep holes are located at the front of the TRAC to carry moisture away from the building. Uses include above windows and doors; or as a Starter TRAC. The return face flange is 1" (25 mm) wide, with striations which provide a strong physical bond for the base coat to the return flange. A double row of holes allows for positive bond of the base to the substrate. Weep holes are set at 4" (102 mm) on center.
End caps for the WDA Window/Door Arch Drip Edge series have a 3" (76 mm) back flange, provide protection against moisture intrusion by directing water out front of window/door assembly. Low profile design blocks pests/discouraging nesting.