Product name search
A 3-1/2" (89 mm) wide flange head flashing for windows or doors. Positive angled to move any incidental moisture away from structure. Nailing flange is pre-slotted to reduce labor when an arched condition exists.
These factory thermal welded, surface mounted intersections eliminate the costly and time consuming need to field cut intersections.
Made for exterior use in EIFS systems. The EPS board should be routed and surface mounted reveal then inserted into channel. Wide perforated surface mounted flanges assure positive bonding of base coat to EPS and 1/8" (3 mm) stops assure proper base and finish thickness.
Designed for use where a horizontal soffit and a vertical plane intersect. Attach the F-clip to either the vertical fascia board or the intersecting vertical wall with the wide flange of the F-clip extending downward. Then insert the perforated vent into the F-clip.Vent holes 1/8" (3 mm) diameter.
Designed for use with 1" and 1-1/2" (25 and 38 mm) foam board. Vent holes 1/8" (3 mm) diameter. Vented area is 2-5/8" (67 mm) wide. Extra wide mounting flanges make attachment to sheathing easier. Wide flange has 1/8" (3 mm) stops with striations to provide positive bond of the base coat and mesh assuring proper finish thickness.
Water management product designed to provide positive slope at window sill. Window frame sits on sloped sill wedge, and directs moisture towards the face of the moisture barrier where it drains out the bottom of the system.
A surface mounted 45 degree angled bead that can be used around windows, doors and any termination point as a backing for perimeter sealant application. All exposed surfaces have striations that provide a positive bonding of caulk and base material. Angled portion is 5/8" (16 mm) wide; surface flange is 1-3/4" (44 mm) wide and has a built-in 1/8" (3 mm) stop to assure proper base and finish thickness.
A surface mounted 45 degree angled bead that can be used around windows, doors and any termination point as a backing for perimeter sealant application. All exposed surfaces have striations that provide a positive bonding of caulk and base material. Angled portion is 5/8" (16 mm) wide; surface flange is 1-3/4" (44 mm) wide and has a built-in 1/8" (3 mm) stop to assure proper base and finish thickness.
An alternative to removing foam around window and installing backer rod and caulk.
This surface mounted expansion joint may be used with a fiber reinforced modified stucco system. Center "V" is protected with tape to keep channel clean during installation. Excellent paint adhesion.