Product name search
![](https://plasticomponents.com/wp-content/uploads/2015/09/Casing-Bead-w5-Flange-wpcf_100x100.jpg)
Use where a 5" flange is required at the termination point at a roof line. Flange is striated to assist in bonding.
![](https://plasticomponents.com/wp-content/uploads/2015/09/Window-Door-Casing-Bead-wpcf_100x100.jpg)
Creates a decorative reveal at the termination point of window and door openings.
![](https://plasticomponents.com/wp-content/uploads/2015/09/Critter-Control-Casing-Bead-wpcf_100x100.jpg)
Designed to terminate stucco at the base of a wall – serves as a cap for 1/2" (13 mm) or 5/8" (16 mm) sheathing. Weep holes in the ground drain moisture away from the base of the wall.
![](https://plasticomponents.com/wp-content/uploads/2015/07/Backer-Rod-front-lifted-hand-sRGB-for-website-wpcf_100x100.jpg)
Casing Bead with Spacing Flange maintains a consistent 3/8" (10 mm) spacing around a window/door frame, allowing for the application of waterproofing material.
![](https://plasticomponents.com/wp-content/uploads/2015/09/Medium-Flange-Casing-Bead-wpcf_100x100.jpg)
Use where a medium flange is required at a termination point.
![](https://plasticomponents.com/wp-content/uploads/2015/09/Unpunched-Casing-Bead-wpcf_100x100.jpg)
To be used in areas where stucco terminates at foundations, windows, doors, or any other termination point. Will not rust or dent.
![](https://plasticomponents.com/wp-content/uploads/2015/09/Old-Style-Casing-Bead-wpcf_100x100.jpg)
Engineered for use at any area where thicker amounts of stucco are specified, eg: "quoins", bands, or pop outs.
![](https://plasticomponents.com/wp-content/uploads/2015/09/Casing-Bead-for-Arches-wpcf_100x100.jpg)
For use in any area where an arched detail has been specified. This stucco casing bead can be converted into an arched casing bead by simply cutting the pre-slotted flange,
![](https://plasticomponents.com/wp-content/uploads/2015/09/Inside-Outside-Corner-Slip-Joint-Expansion-Joint-wpcf_100x100.jpg)
Designed to form a plastered inside or outside corner and absorb the movement of two 90º connecting walls.
![](https://plasticomponents.com/wp-content/uploads/2015/09/Slip-Joint-Expansion-Joint-21-wpcf_100x100.jpg)
Used as an expansion joint while providing a reveal. Designed to expand and contract when severe movement is anticipated. When using in the vertical application, the lath should be split before installing the slip joint. When used in a horizontal plane, the same procedure should be used before placing the female side on top.