Product name search
![](https://plasticomponents.com/wp-content/uploads/2020/06/01-H-Mould-e1592408187415-wpcf_100x100.jpg)
H Trim was designed to conceal vertical joints and provide a superior appearance over caulk.
Fiber cement board trims provide a rust-free finish, superior moisture management and protection and can be used with 5/16" to 1/2" board. These products provide a cleaner job and a better finish.
![](https://plasticomponents.com/wp-content/uploads/2020/06/19-Drip-Egde-Inside-Corner-e1592408137144-wpcf_100x100.jpg)
Corner Bead was designed to provide consistent angles and even, impact-resistant corners.
Fiber cement board trims provide a rust-free finish, superior moisture management and protection and can be used with 5/16" to 1/2" board. These products provide a cleaner job and a better finish.
![](https://plasticomponents.com/wp-content/uploads/2020/04/SBZ131-right-RGB-wpcf_100x100.jpg)
• Reduces thermal bridging in continuous insulation applications
• Heavy duty PVC
![](https://plasticomponents.com/wp-content/uploads/2019/08/02-STCI-product-w.one-hole--wpcf_100x100.jpg)
Designed for the base of a hard coat CI wall, this weeped STARTER TRAC™ combines the TRAC with a built-in termination bead. Made of contractor-grade PVC, trims are made for use with three coat stucco finishes. Click here to view with 3/4″ Stucco Finish
![](https://plasticomponents.com/wp-content/uploads/2019/08/02-STCI-product-w.one-hole--wpcf_100x100.jpg)
Designed for the base of a hard coat CI wall, this weeped STARTER TRAC™ combines the Trac with a built-in termination bead. Made of contractor-grade PVC, trims are made for use with three-coat stucco finishes. Click here to view with 7/8″ Stucco Finish
![](https://plasticomponents.com/wp-content/uploads/2017/12/image005-wpcf_100x100.jpg)
Plastic Components’ ULTRA ROOF MAT™, our new roof ventilation mat, creates a cavity for air to flow in multiple directions under roofing material and the sheathing beneath it.
Ultra ROOF MAT features a thin nylon matrix profile that prolongs the life of the roof structure and membrane by reducing the damage caused by water and moisture – including mildew, mold and corrosion/deterioration of the roofing material. It’s made of extremely flexible, heat-resistant material that conforms to any contoured surface or roofing material such as cedar, metal, tile, etc. – perfect for residential and commercial applications.
NOT RECOMMENDED FOR MASONRY or STONE VENEER APPLICATIONS.
![](https://plasticomponents.com/wp-content/uploads/2017/12/222-50DR-2-wpcf_100x100.jpg)
Perforated flanges are placed on top of separated sheets of sheathing board with the extra deep "U" channel placed in separate channel. Has built-in stops to ensure proper thickness of base and finish.
![](https://plasticomponents.com/wp-content/uploads/2017/09/CI-no-flange-w-holes--wpcf_100x100.jpg)
Save time and installation costs with Plastic Components’ new continuous insulation trim. Its design incorporates the cornerbead into a single piece, improving job quality and delivering a better finish. Made of heavy duty, contractor-grade PVC our new Hard Coat TRAC™ is perfect for 1.5”, 2” and 2.5” foam, with 7/8" stucco finish. Patent Pending. Click here to view with 3/4″ Stucco Finish
![](https://plasticomponents.com/wp-content/uploads/2017/09/CI-no-flange-w-holes-1-1-wpcf_100x100.jpg)
Save time and installation costs with Plastic Components’ new continuous insulation trim. Its design incorporates the cornerbead into a single piece, improving job quality and delivering a better finish. Made of heavy duty, contractor-grade PVC our new Hard Coat TRAC™ is perfect for 1.5”, 2” and 2.5” foam, with 3/4" stucco finish. Patent Pending. Click here to view with 7/8″ Stucco Finish
![](https://plasticomponents.com/wp-content/uploads/2017/06/U-Drip-Trac-3x4-wpcf_100x100.jpg)
U-Drip Trac™ is perfect for Exterior Insulated Finish Systems (EIFS) and other foam systems requiring moisture management.
The product is weeped (1/8" diameter holes), with 5/16" diameter holes on the 1/2" wide
‘shelf’ – perfect for moving moisture away from the foam system.
• 3-1/2" (89 mm) unpunched back flange with 1/4" diameter attachment holes spaced 6" on-center
• Supports 1" or greater foam board
• Extra wide ‘shelf’ for better keying
• Easy to handle, UV rated