Product Search
![](https://plasticomponents.com/wp-content/uploads/2015/07/Half-Round-3-4-Bullnose-wpcf_100x100.jpg)
3/4" (19 mm) half round bullnose for 1/2" (13 mm) board
Used for termination when a window or door casing trim is eliminated. Can also be used where extra layers of drywall are being used for decorative purposes. Trim is to be installed after installation of board.
![](https://plasticomponents.com/wp-content/uploads/2015/07/Half-Round-3-4-Bullnose-wpcf_100x100.jpg)
Moldura redondeada semi circular de 3/4" (19 mm).
Used for termination when a window or door casing trim is eliminated. Can also be used where extra layers of drywall are being used for decorative purposes. Trim is to be installed after installation of board.
![](https://plasticomponents.com/wp-content/uploads/2015/07/Half-Round-3-4-Bullnose-wpcf_100x100.jpg)
Moldura redondeada semi circular de 3/4" (19 mm).
Used for termination when a window or door casing trim is eliminated. Can also be used where extra layers of drywall are being used for decorative purposes. Trim is to be installed after installation of board.
![](https://plasticomponents.com/wp-content/uploads/2015/07/Half-Round-3-4-Bullnose-wpcf_100x100.jpg)
3/4" (19 mm) half round bullnose for 5/8" (16 mm) board
Used for termination when a window or door casing trim is eliminated. Can also be used where extra layers of drywall are being used for decorative purposes. Trim is to be installed after installation of board.
![](https://plasticomponents.com/wp-content/uploads/2015/07/2050-sm-wpcf_100x100.jpg)
4-1/8" (105 mm) overall width with perforated flanges.
3/4" (19 mm) ground
Should be used in any application where a surface area is more than 144 square feet. The wide flange allows for more "keying" of the stucco. The "eyebrows" allow for the stucco to key to the "V". Vertical joints should be attached to a stud where necessary.
![](https://plasticomponents.com/wp-content/uploads/2015/09/Inside-Corner-Control-Joint-wpcf_100x100.jpg)
Inside Corner Control Joint
3/4" (19 mm) ground
Inside Corner Control Joint relieves stress and cracking caused by expansion and contraction in the inside angles of walls and ceilings.
![](https://plasticomponents.com/wp-content/uploads/2015/07/2050-sm-wpcf_100x100.jpg)
4-1/8" (105 mm) overall width with perforated flanges.
7/8" (22 mm) ground
Should be used in any application where a surface area is more than 144 square feet. The wide flange allows for more "keying" of the stucco. The "eyebrows" allow for the stucco to key to the "V". Vertical joints should be attached to a stud where necessary.
![](https://plasticomponents.com/wp-content/uploads/2015/07/2050-sm-wpcf_100x100.jpg)
Junta de Control en “V” con ala posterior perforadas,
4-1/8" (105 mm) de ancho total.
Profundidad de 7/8" (22 mm)
Should be used in any application where a surface area is more than 144 square feet. The wide flange allows for more "keying" of the stucco. The "eyebrows" allow for the stucco to key to the "V". Vertical joints should be attached to a stud where necessary.
![](https://plasticomponents.com/wp-content/uploads/2015/09/Floor-Line-Control-Bead-w-Drip-Edge-11-wpcf_100x100.jpg)
Control Bead w/Drip Edge 3-1/2" (89 mm) unpunched nailing flange.
7/8" (22 mm) x 1/2" (13 mm) ground
For use as a horizontal control joint and a moisture control device where two dissimilar materials, such as wood and concrete, meet. (e.g. First floor concrete block construction and wood frame second floor). It allows moisture to migrate away from the wall. The unique drip edge prevents migrating moisture from entering the v-groove of the control joint.
![](https://plasticomponents.com/wp-content/uploads/2015/09/Factory-Assembled-Intersections-for-Floor-Line-Control-Bead-1-wpcf_100x100.jpg)
Factory Assembled Inside and Outside Corner Intersections, 7/8" (22 mm) Floor Line Control Bead.
7/8" (22 mm) x 1/2" (13 mm) ground
Factory Assembled Intersections for Floor Line Control Bead reduce labor in the field and provide a better quality finish