NEW! See our article on Innovative Lathing and Trim Accessories

V Control Joint

Click on thumbnail(s) to view larger image

Product Photo
Product Photo
Product Photo
Product Photo
Product Photo

Product Category: Plaster/Stucco

Application

Should be used in any application where a surface area is more than 144 square feet. The wide flange allows for more "keying" of the stucco. The "eyebrows" allow for the stucco to key to the "V". Vertical joints should be attached to a stud where necessary.

Specifications

Control Joints shall be Plastic Components, Inc. #_______. All exterior accessories shall be of PVC material conforming to ASTM standards D1784, C1063, C1861 and D4216. They shall be used where specified by the design authority and installed per industry standards.

Information Sheets

Drawings

Product Chart

Add to Submittal Product # Description Dimensions Packaging
2038

4-1/8" (105 mm) overall width with perforated flanges.

3/8" (10 mm) ground

35 per box
2050

4-1/8" (105 mm) overall width with perforated flanges.

1/2" (13 mm) ground

35 per box
2058

4-1/8" (105 mm) overall width with perforated flanges.

5/8" (16 mm) ground

35 per box
2075

4-1/8" (105 mm) overall width with perforated flanges.

3/4" (19 mm) ground

30 per box
2078

4-1/8" (105 mm) overall width with perforated flanges.

7/8" (22 mm) ground

25 per box
2100

4-1/8" (105 mm) overall width with perforated flanges.

1" (25 mm) ground

20 per box

Product Notes

10' (3 m) Lengths • Connector clips included.

All butt joints, intersections and ends shall be caulked at the time of installation using our elastomeric sealant PC-TS00215.

It is recommended that PVC products be used for all exterior exposures.