Product Search
STRIP-LATH PLUS™ strips of
ULTRA-LATH PLUS® 1/4" Self-furred Non-Rusting Plastic Lath
8" (203 mm) width;
96" (2,438 mm) length
For either exterior or interior vertical and horizontal application; should only be used for non-rated assemblies. The self-furring ridges provide exceptional keying and are applied towards the substrate. ULTRA-LATH PLUS® is impervious to sand and any harsh chemicals found in Portland-based stucco. IT WILL NEVER RUST. It may be installed over any code approved substrate.
Rollos ULTRA-LATH® inoxidables, autoseparación, resistentes a daños - rollo de 27" x 100' (686 mm x 30.5 M)
Empaque: 225 pies2
por rollo. 4,050 pies2
por Tarima.
For either exterior or interior vertical or horizontal application; should only be used for non-rated assemblies. The self-furring ridges provide exceptional keying and are applied towards the substrate. ULTRA-LATH® is impervious to sand and any harsh chemicals found in Portland-based stucco. IT WILL NEVER RUST. It may be installed over any code approved substrate.
ULTRA-LATH® Plastic Lath ROLLS - 27" x 100' roll (686 mm x 30.5 m)
225 sq ft per roll
For either exterior or interior vertical or horizontal application; should only be used for non-rated assemblies. The self-furring ridges provide exceptional keying and are applied towards the substrate. ULTRA-LATH® is impervious to sand and any harsh chemicals found in Portland-based stucco. IT WILL NEVER RUST. It may be installed over any code approved substrate.
ULTRA-LATH PLUS® Plastic Lath Rolls - 27" x 75' roll (686 mm x 22.9 m)
168 sq ft per roll
ULTRA-LATH PLUS® is designed for exterior or interior vertical or horizontal application. It’s 1/4" self-furring ridges provide exceptional keying and should be applied with the ridges toward the substrate. ULTRA-LATH PLUS® meets ASTM C1764, C1788, C1780, C1063, C1861 and C1787 and is impervious to sand and any harsh chemicals found in portland based stucco. IT WILL NEVER RUST. It may be installed over any code approved substrate. ULTRA-LATH PLUS® now complies with 2020 FL Building Code and Metro Dade County HVHZ requirements for Impact and Cyclic performance (TAS 201, 202, 203) and is recognized by IAPMO Uniform Evaluation Services report #0284 as code compliant to the 2009 and 2012 International Building Code and Institute for Research for Construction (Canada).
ULTRA-LATH PLUS® Rollos de malla plástica - Rollo de 27" x 75' (686 mm x 22.9 M)
Cantidad por Tarima: 18 rollos por Tarima/3,024 pies² por Tarima
ULTRA-LATH PLUS® is designed for exterior or interior vertical or horizontal application. It’s 1/4" self-furring ridges provide exceptional keying and should be applied with the ridges toward the substrate. ULTRA-LATH PLUS® meets ASTM C1764, C1788, C1780, C1063, C1861 and C1787 and is impervious to sand and any harsh chemicals found in portland based stucco. IT WILL NEVER RUST. It may be installed over any code approved substrate. ULTRA-LATH PLUS® now complies with 2020 FL Building Code and Metro Dade County HVHZ requirements for Impact and Cyclic performance (TAS 201, 202, 203) and is recognized by IAPMO Uniform Evaluation Services report #0284 as code compliant to the 2009 and 2012 International Building Code and Institute for Research for Construction (Canada).
Inverted 1/2" (13 mm) expansion joint.
1/16" (2 mm) finish top with removable tape. Depth of V groove is 3/8" (10 mm)
Flexible control joint for use in wall and ceiling design to control movement. Has removable tape to protect the 3/8" (10 mm) depth "V" groove during installation. Flanges have holes to ensure positive bond of drywall mud to surface of board. Has built-in 1/l6" (2 mm) stops to ensure proper drywall thickness. Flanges are placed on top of two separated sheets of sheathing with "V" groove placed between separated board.
Inverted 1/2" (13 mm) expansion joint. Depth of "V" groove is 3/8" (10 mm).
1/16" (2 mm) finish top with removable tape.
Flexible PVC control joint designed specifically for DEFS systems. Perforated flanges are placed on top of separated sheets of sheathing with "V" placed in separated channel. May be used in vertical or horizontal applications. Has removable tape that protects 3/8" (10 mm) depth "V" groove during application; also provides a 1/2" (13 mm) reveal. Built-in stops ensure proper thickness of base and finish.
Inverted 3/4" (19 mm) expansion joint with wide "V". Depth of "V" groove is 3/8" (10 mm).
1/16" (2 mm) finish top with removable tape.
Flexible PVC control joint designed specifically for DEFS systems. Perforated flanges are placed on top of separated sheets of sheathing with "V" placed in separated channel. May be used in vertical or horizontal applications. Has removable tape that protects 3/8" (10 mm) depth "V" groove during application; also provides a 1/2" (13 mm) reveal. Built-in stops ensure proper thickness of base and finish.
Inverted 3/4" (19 mm) expansion joint with wide "V" groove, 3/8" (10 mm) depth. 1/16" (2 mm) finish top with removable tape.
Flexible control joint for use in wall and ceiling design to control movement. Has removable tape to protect the 3/8" (10 mm) depth "V" groove during installation. Flanges have holes to ensure positive bond of drywall mud to surface of board. Has built-in 1/l6" (2 mm) stops to ensure proper drywall thickness. Flanges are placed on top of two separated sheets of sheathing with "V" groove placed between separated board.
90º 1" (25 mm) plaster reveal angle. .
1/2" (13 mm) ground
ULTRA-TRAC™ one-piece intersections are field engineered to give you a durable, clear, clean channel and watertight intersection every time. The one-piece base has built-in alignment guides for the plaster reveal and also provides a base for caulking the connecting reveal. Eliminates the connector clip at intersection.