ULTRA-LATH PLUS® Plastic Lath – Meets ASTM 1/4″ Self-Furred Plastic Lath
Product Category: Featured, Lumber, Building Materials, Plaster/Stucco, Stone Veneer, Ultra-Lath®
Application
Designed for exterior or interior vertical or horizontal application; ULTRA-LATH PLUS® should only be used for non-rated assemblies. It’s 1/4" self-furring ridges provide exceptional keying and should be applied with the ridges toward the substrate. ULTRA-LATH® PLUS meets ASTM C1764, C1788, C1780, C1063, C1861 and C1787 and is impervious to sand and any harsh chemicals found in portland based stucco. IT WILL NEVER RUST. It may be installed over any code approved substrate. ULTRA-LATH PLUS now complies with 2020 FL Building Code and Metro Dade County HVHZ requirements for Impact and Cyclic performance (TAS 201, 202, 203) and is recognized by IAPMO Uniform Evaluation Services report #0284 as code compliant to the 2009 and 2012 International Building Code and Institute for Research for Construction (Canada).
Specifications
ULTRA-LATH® PLUS shall be Plastic Components Inc. #________. It shall be used where specified by the design authority and installed per industry standards ULTRA-LATH® PLUS now complies with 2020 FL Building Code and Metro Dade County HVHZ requirements for Impact and Cyclic performance (TAS 201, 202, 203) and meets ASTM C1764, C1780, C1063, C1787, C1861 and C1788. Meets ASTM 330.84 and ASTM 330.84b.
Information Sheets
Product Chart
Add to Submittal | Product # | Description | Dimensions | Packaging |
---|---|---|---|---|
Product Notes
We recommend Plastic Components trims for applications using Ultra-Lath PLUS. Patent Pending.