CB STARTER TRAC™ with Drip Edge (Weeped and Unweeped)
Click on thumbnail(s) to view larger image
Product Category: Direct Applied
Application
Provides a clean starting edge at the stem wall. Eliminates the need to back wrap; drip edge allows moisture to run down the face and not back into the system. Excellent caulk and paint adhesion, holes on return flange allow for base coat to bond to surface of substrate.
Specifications
STARTER TRAC with Drip Edge shall be Plastic Components Inc. #________. All exterior accessories shall conform to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the design authority and installed per industry standards.
Information Sheets
Drawings
Product Chart
| Add to Submittal | Product # | Description | Dimensions | Packaging |
|---|---|---|---|---|
| CB-58-16L | Dim A: 5/8" (16 mm) |
60 per box | ||
| CB-50-16L | Dim A: 1/2" (13 mm) |
60 per box |
Product Notes
10' (3 m) lengths - Add suffix "WP" to order with weep holes. Example: CBWP-50-16L • Please measure Dimension A inside to inside
All butt joints, intersections and ends shall be caulked at the time of installation using our elastomeric sealant PC-TS00215.
It is recommended that PVC products be used for all exterior exposures.