STARTER TRAC™ (ST series)

Click on thumbnail(s) to view larger image

Product Photo
Product Photo

Product Category: Direct Applied

Application

Can be used as STARTER TRAC or casing bead. Front return is 3/4" (19 mm) with striations and perforations for positive bonding of base to foam board. There is no Drip Edge. Ideal for use where finished edge is exposed. 3" (76 mm) wide nailing flange.

Specifications

STARTER TRAC shall be Plastic Components Inc. #________. All exterior accessories shall conform to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the design authority and installed per industry standards.

Information Sheets

Drawings

Product Chart

Add to Submittal Product # Description Dimensions Packaging
ST-58

Can be used as STARTER TRAC or casing bead. Front return is 3/4" (19 mm) with striations and perforations for positive bonding of base to foam board. There is no Drip Edge. Ideal for use where finished edge is exposed. 3" (76 mm) wide nailing flange.

Dim A: 5/8" (16 mm)

35 per box
ST-50

Can be used as STARTER TRAC or casing bead. Front return is 3/4" (19 mm) with striations and perforations for positive bonding of base to foam board. There is no Drip Edge. Ideal for use where finished edge is exposed. 3" (76 mm) wide nailing flange.

Dim A: 1/2" (13 mm)

35 per box

Product Notes

10' (3 m) lengths - Add suffix "WP" to order with weep holes. Example: STWP-50 • Splice plates available upon request • Please measure Dimension A inside to inside.

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.