NEW! See our article on ASTM Standards
STRIP-LATH® strips of
ULTRA-LATH® 1/8″ Self-furred Non-Rusting Plastic Lath
Click on thumbnail(s) to view larger image
Product Category: Featured, Plaster/Stucco, Strip-Lath Plus™, Ultra-Lath®
Application
For either exterior or interior vertical or horizontal application; should only be used for non-rated assemblies. The self-furring ridges provide exceptional keying and are applied towards the substrate. ULTRA-LATH® is impervious to sand and any harsh chemicals found in Portland-based stucco. IT WILL NEVER RUST. It may be installed over any code approved substrate.
Specifications
ULTRA-LATH® Plastic Lath strips shall be Plastic Components, Inc. #_____. It shall be used where specified by the design authority and installed per industry standards ASTM C1764 and C1861. Meets ASTM 330.84 and ASTM 330.84b.
Information Sheets
Product Chart
| Add to Submittal | Product # | Description | Dimensions | Packaging |
|---|---|---|---|---|
| PDM3 | STRIP-LATH® strips of ULTRA-LATH® 1/8" Self-furred Non-Rusting Plastic Lath |
3" wide x 96" long (76 mm x 2.4 m) |
50 per box | |
| PDM4 | STRIP-LATH® strips of ULTRA-LATH® 1/8" Self-furred Non-Rusting Plastic Lath |
4" wide x 96" long (102 mm x 2.4 m) |
50 per box | |
| PDM6 | STRIP-LATH® strips of ULTRA-LATH® 1/8" Self-furred Non-Rusting Plastic Lath |
6" wide x 96" long (152 mm x 2.4 m) |
50 per box | |
| PDM8 | STRIP-LATH® strips of ULTRA-LATH™ 1/8" Self-furred Non-Rusting Plastic Lath |
8" wide x 96" long (203 mm x 2.4 m) |
50 per box |
Product Notes
We recommend Plastic Components trims for applications using Ultra-Lath Plastic Lath.
For Horizontal Installation: Refer to Tile Council of North America Inc. (TCNA), F185-14 and RH140-14.
