Product name search
Can be used as STARTER TRAC or casing bead. Front return is 3/4" (19 mm) with striations and perforations for positive bonding of base to board. There is no Drip Edge. Ideal for use where finished edge is exposed. 3" (76 mm) wide nailing flange.
Provides a clean starting edge at the stem wall. Eliminates the need to back wrap; drip edge allows moisture to run down the face and not back into the system. Excellent caulk and paint adhesion, holes on return flange allow for base coat to bond to surface of substrate.
Serves as a protective edge for sheathing material at areas of termination. Eliminates the need to back wrap; provides a clean starting detail. Excellent caulk and paint adhesion, holes on return flange allow for base coat to bond to surface of substrate.
Shadow Mold/"Z" Mold provides a reveal or relief detail around windows, doors, and wall to ceiling junctions. Can be used in either vertical or horizontal position.
A surface mounted "L" bead to be used at windows, doors or any termination point. Extra wide surface flange makes it possible to adjust and fill any gaps caused by short trimming of the sheathing board. Wide flange has striations and perforations to provide a positive bond of base to sheathing board. Has built-in 1/8" (3 mm) stop to ensure proper thickness of base and finish.
A surface mounted "J" bead design that protects the bottom edge of the sheathing board and eliminates the need for costly back wrapping. Has a wide return flange with striations and perforations for positive bond of base coat to casing bead and surface of sheathing material. Has built-in 1/8" (3 mm) stop to ensure proper thickness of base and finish.
Designed for either vertical or horizontal application. Sheathing board slides in between nailing flange and perforated "wings". "Wings" have stops to ensure a clean, straight line during application of ground coat and finish. Perforations assure positive bond of ground coat to substrate.
Designed to be installed between two separated sheets of sheathing board. It has a full 1-1/2" (38 mm) wide flange that rests on top of the sheathing board. The flanges have striations and perforations to ensure positive keying and bonding of the ground coat.
Can be used as a reveal on surface area coating applications. Overall width is 2-1/4" (57 mm) except Product #1556, its overall width is 5-1/8" (130 mm)
Can be used as a reveal on surface area coating applications. Overall width is 2-1/4" (57 mm) except Product #1556, its overall width is 5-1/8" (130 mm)