End Caps for SB-EMT Series
Click on thumbnail(s) to view larger image
Product Category: CI/EIFS/Hardcoat
Application
End caps for the SB-EMT series have a 3" (76 mm) back flange, provide protection against moisture intrusion by directing water out front of window/door assembly. Low profile design blocks pests/discouraging nesting.
Specifications
End Caps shall be Plastic Components Inc. #_________. All exterior accessories shall meet ASTM standards D1784, C1063 and D4216, shall be third party tested and Canadian Code Compliant. They shall be used where specified by the design authority and installed per industry standards.
Information Sheets
Product Chart
| Add to Submittal | Product # | Description | Dimensions | Packaging |
|---|---|---|---|---|
| WDEC3-2 | 3" (76 mm) back flange |
2" (51 mm) bottom flange |
25 per box | |
| WDEC3-15 | 3" (76 mm) back flange |
1-1/2" (38 mm) bottom flange |
25 per box | |
| WDEC3-1 | 3" (76 mm) back flange |
1" (25 m) bottom flange |
25 per box |
Product Notes
The base coat mesh should be lapped over the top of the perforated flanges and across all butt joints.
It is recommended that PVC products be used for all exterior exposures.
Patented