STARTER TRAC™ Drip Edge

Click on thumbnail(s) to view larger image

Product Photo
Product Photo
Product Photo
Product Photo

Product Category: Direct Applied

Application

STARTER TRAC® with drip edge. Striations on front return and perforations ensure positive physical bond of the base coat to the foam board. Extra wide 3" (76 mm) nailing flange. Base shelf has weep holes 3" (76 mm) o.c. to allow water to migrate from the system.

Specifications

STARTER TRAC® Drip Edge shall be Plastic Components Inc. #________. All exterior accessories shall conform to ASTM standards D1784, C1063 and D4216. They shall be used where specified by the design authority and installed per industry standards.

Information Sheets

Drawings

Product Chart

Add to Submittal Product # Description Dimensions Packaging
STDE-58

STARTER TRAC® with drip edge. Striations on front return and perforations ensure positive physical bond of the base coat to the foam board. Extra wide 3" (76 mm) nailing flange. Base shelf has weep holes 3" (76 mm) o.c. to allow water to migrate from the system.

Dim A: 5/8" (16 mm)

35 per box
STDE-50

STARTER TRAC® with drip edge. Striations on front return and perforations ensure positive physical bond of the base coat to the foam board. Extra wide 3" (76 mm) nailing flange. Base shelf has weep holes 3" (76 mm) o.c. to allow water to migrate from the system.

Dim A: 1/2" (13 mm)

35 per box

Product Notes

10' (3 m) lengths • Splice plates available upon request.

All butt joints, intersections and ends shall be caulked at the time of installation using an elastomeric sealant, such as Plastic Components' Ultra-TechT (PC-ULTW).

It is recommended that PVC products be used for all exterior exposures.